CRMI
Certified Residential Mold Inspector

Step By Step Mold Inspection Process Explained

CRMI

Step By Step Mold Inspection Process Explained

Mold issue is a fairly common problem that most house owners have to deal with. Mold growth usually takes place in those areas where moisture content is high in the air. Mold needs moisture and water to grow and multiply. Mold in the house can cause a lot of problems for the residents of the house such as a bad odor, allergy and asthma problems and many other health problems and destruction of the wooden furniture and walls.

When you initially suspect mold growth in your house, you will need to go for a certified mold inspection process. You can contact any of the Los Angeles certified mold inspections company if you are residing in or nearby Los Angeles. A certified mold inspection process will be followed through a few necessary steps to get to know the amount and type of mold in your house.

Step 1: Verbal Inspection
When you will first contact any Los Angeles certified mold inspections company, they will ask you a few questions to get to know the condition of mold. These can include:
• Do you have humid conditions in your house?
• Do you have any water problem such as a leaking roof or walls?
• Do you experience a musty, rustic or moldy smell?
• Do you have any plumbing leaks?
• Have you seen mold in your house?
These questions will give a proper idea to a mold inspection company regarding the condition of mold in your house.

Step 2: Visual Inspection
After asking the necessary question, an expert mold inspector will visit your house for a complete evaluation. A complete check of the mold will be done. Many professional devices can also be used such as the moisture meters, hydrometers, laser thermometers and Thermal Imaging Cameras to check the moisture levels, temperature, humidity and condensation levels of your house. Your house will also be check for any water penetration or leaks. The root cause and the starting point of the mold and fungus will be looked for. In some cases, digital pictures will also be taken for further assessment and to get to know the types of molds.

Step 3: Physical Assessment
Mold samples will also be taken for evaluation and assessment in the lab. The assessment will be done to get to know the type and condition of the mold present in your house. The air sample of your house will also be taken to measure the quality of air circulating inside and outside your house. These steps will also tell the extent of mold present and whether mold removal is necessary or not. The different types of assessment done are as follows:
• Spore Trap: This is used to measure the indoor air quality. The spore trap will collect the mold sample through an extremely thin material and you will get to know how much of fungus is present in the air.
• Swab Test: This test is used to know the types of mold present in your house.
• Bulk Sampling: This is done to check the entire house or materials by taking different materials present in the house.

Step 4: Report
After a complete analysis, a written report will be presented to you stating the amount of mold, the type of mold, the extent of mold present, the root cause of the mold, its rate of spreading and how early you should get it removed.

References:
1. http://www.ecotechmold.com/2012/01/the-mold-inspection-process-explained-by-a-licensed-and-certified-mold-inspector-in-philadelphia/
2. http://www.lhianalytical.com/Mold_Inspection_Information/
3. http://www.islandcatastrophe.com/blog/2016/september/the-steps-of-a-mold-inspection.aspx

CRMI
Certified Residential Mold Inspector

I’ll Call You!

Have me call you.

Call for a Free Quote Today. (310) 863-2349

SBMI
South Bay Mold Inspections

We use the latest Technology

Thermal Imaging Cameras
Thermal Image of a house